Black Friday 10% off all floor stock*, 15% off Northern Lights Generators in stock*, 10% off Northern Lights Generator factory order* plus 20% off installation labour with your purchase* Offer ends 27 November 2026, *Terms & Conditions Apply
A superyacht berthed at a marina pontoon under a clear blue sky
Cyclone-Season Layover

Interstate Marine Repairs on the Gold Coast During the Cyclone Season

If you bring your vessel south for the cyclone season, we can use the stay to complete repairs, servicing and upgrades at Gold Coast City Marina, Coomera. The work can include generators, stabilisers, shafts, watermakers and air conditioning, finished before the vessel returns north.

5.0 From 28 Google reviews
07 5612 7161
Overview

Marine Repairs & Refit During the Cyclone-Season Stay

Marine Solutions Australia carries out marine repairs and vessel refit work on the Gold Coast for interstate and North Queensland owners who bring a vessel south from the Whitsundays, Townsville, Cairns or Port Douglas for the cyclone season. If you are planning a stay on the Gold Coast, we can schedule major work around it. A planned stay at the berth or on the hardstand suits work that takes the vessel out of service, such as generator rebuilds, stabiliser and thruster overhauls, running gear, exhaust systems, watermakers, air conditioning or a repower.

We work from Gold Coast City Marina, Coomera. The marina shipyard and The Boat Works next door provide the hardstand and lifts, and components removed from the vessel are rebuilt in our own workshop. Larger vessels stay in the water and are worked on at the berth. On a 54m superyacht, we removed the port generator's engine and alternator for rebuilding, then refitted them. Our wider engineering work on that vessel took six weeks. Smaller vessels are lifted once, and all work below the waterline is completed during that haul-out.

You do not need to be on the Gold Coast during the work. We send options and estimates in writing, with photos and video. The return trip north is planned around the end of the season and the weather, and can be made by our delivery skipper or by you. Call 07 5612 7161 or contact us with your vessel details, where you currently keep it during cyclone season and what work it needs.

07 5612 7161
Why The Layover

Time on the Gold Coast for the Larger Jobs

Any refit takes a vessel out of use. If your vessel is already on the Gold Coast for the cyclone season, larger jobs can be completed during the stay. In 2026, an exhaust overhaul on a RINA-class motor yacht took ten weeks on the hardstand. A stabiliser fin shaft and bow thruster overhaul took four weeks. Both fit within a November to April stay, with time for sea trials.

The Boat Works can lift vessels up to 300 tonnes, and Gold Coast City Marina has undercover hardstand. The two yards are side by side on the Coomera River, and we carry out refit work at both. Our workshop is at the marina, and our second showroom is under construction at Pier 25, The Boat Works.

At the berth or on the hardstand · Written options · Skippered delivery each way

10 weeks
Exhaust Overhaul, RINA-Class Motor Yacht
6 weeks
Engineering Work at the Berth, 54m Superyacht
300 t
Travel Lift at The Boat Works
Nov to Apr
Cyclone-Season Stay
How It Runs

How a Cyclone-Season Refit Works

Booked before the season, completed over summer and sea-trialled before the vessel returns north.

07 5612 7161
  1. Book Before the Season

    Tell us about the vessel, where it is now and the work required. Haul-out dates are booked with the yard early, and we schedule the work within them.

  2. Delivery South

    Our skipper can deliver the vessel from Cairns, Townsville or the Whitsundays in stages via Mackay and Bundaberg, planned around the reef and the weather. You can also bring the vessel down yourself, and we will meet you at the berth.

  3. Inspection & Options

    Our engineers inspect the vessel and review the work list. We then send you the options in writing, with costs, photos and video.

  4. The Work

    The work is done at the berth or on the hardstand, with the yard's painters and other trades scheduled around ours. Parts come from our showroom stock, local suppliers or the manufacturer, and we send progress updates during the job.

  5. Sea Trial & Return North

    Commissioning and sea trials take place in the final weeks of the stay, and you are welcome to attend. The vessel then returns north at the end of the season.

Where The Work Happens

At the Berth or on the Hardstand

This depends on the size of the vessel and the work required. Both are supported by the same workshop.

Scaffold lifting frame built over a superyacht generator skid, the alternator disconnected and ready to lift At the Berth

Larger Vessels Stay at the Berth

Superyachts and larger motor yachts stay in the water. Generators, exhausts, pumps and deck machinery are removed at the berth and taken to our workshop. On a 54m superyacht, we removed the port generator's engine and alternator for rebuilding, then refitted them. The wider engineering work on that vessel took six weeks.

  • Generator and prime mover removal through the vessel
  • Exhaust, pump and deck machinery overhauls
  • Workshop rebuilds while the vessel stays at the berth
The Generator Rebuild
Motor yacht on the hardstand at Coomera during a stabiliser fin and bow thruster overhaul On the Hardstand

One Haul-Out for All Work Below the Waterline

Shafts, seals, bearings, stabiliser fins, thrusters, seacocks and antifoul are completed together while the vessel is out of the water. The stabiliser fin and bow thruster overhaul took four weeks on the hardstand at Coomera.

  • Running gear and stabiliser fins in the same haul-out
  • Thruster gearboxes and seacocks while access is open
  • Antifoul and anodes by the yard's painters around our work
The Stabiliser Overhaul
Twin propeller shafts refitted through new bearings under a motor yacht on the hardstand, with rudders and new anodes fitted
This year I handed the reins over to the team at Marine Solutions Australia for our annual maintenance lift. New trim tabs, an updated automated system, a new propeller shaft and bearings — they sorted everything out for me and she's running like an absolute dream. The communication between me as an owner and the team is next level. I cannot recommend these guys enough.
Andrew P. Google review · April 2026
FAQ

Cyclone-Season Refit on the Gold Coast, Common Questions

Insurance, storage, sea trials, timing, delivery and paintwork.

What does the insurer need from me for the cyclone season?

This depends on your policy, and the wording varies. Some policies restrict where the vessel can be kept north of a named latitude between set dates. Some exclude named-cyclone damage in that period, and some do neither. Check the clause with your broker before you plan the trip. If your insurer needs evidence of where the vessel will be, the marina booking and our work schedule are both in writing.

Can the vessel be stored on the Gold Coast for the season?

Berth and hardstand storage is booked directly with Gold Coast City Marina or The Boat Works. Give us your dates and we will schedule the work within them, so the vessel only needs to be lifted once.

Can I fly in for the sea trial?

Yes. We schedule commissioning and sea trials with you, usually in the final weeks before the vessel returns north, so you can see the systems running before it leaves.

What if the season runs late, or the work does?

The return trip is planned around the weather and the condition of the vessel, not a fixed date. If the work is still under way in April, the departure date moves. If the weather in the north has not settled, the vessel stays until it has. We confirm each change with you in writing.

How does the vessel get to the Gold Coast from Cairns or the Whitsundays?

By sea, with our delivery skipper and crew. The trip is made in stages down the coast via Townsville, Mackay and Bundaberg, and is planned around the reef and the weather. We carry out a pre-departure engineering inspection before the vessel leaves. We have delivered a 75-foot motor yacht from Port Douglas this way. You can also bring the vessel down yourself, and we will meet you at the berth.

Do you handle antifoul and paint as part of the refit?

The yard's painters apply the antifoul and paint the topsides. We coordinate their work with the haul-out, so the running gear work and the painting are done in one lift. On the shaft seals job, Harbour Force fitted the anodes and applied the antifoul around our work on the shafts.

Didn’t find your answer? Call 07 5612 7161 (Mon to Fri 8am-4pm) or contact us. We’re happy to talk it through.

Aerial view of a motor boat carving a circular wake across clear blue water

Plan Your Cyclone-Season Refit

Tell us your vessel details, where you currently keep it during cyclone season and what work it needs. We will reply with a plan for the season, a timeline and a written quote.

07 5612 7161
Call