- Output
- 7kW, 50 Hz
- Phase
- 1 or 3-phase
- Weight
- 244 kg
- Dimensions
- 831 × 442 × 603 mm
Image for illustration only. The generator supplied may differ in appearance, depending on the model and the options ordered.
AuthorisedDealer
Northern Lights 7kW Marine Generator
- Black Friday offer price until 27 November 2026, with 20% off installation labour. Not available with any other offer.*
- Estimated delivery: approximately 6 weeks from order confirmation, subject to factory availability and shipping schedules.
- 12V or 24V starting at the same price. Tell us which when you order.
- Sea freight to Gold Coast City Marina, Coomera, is included.
- Installation and delivery elsewhere are quoted separately.
Supplied, installed and serviced by Marine Solutions Australia, one of only a handful of authorised Northern Lights dealers in Australia.
What You Get with the 7kW
- Northern Lights M773LW3GN generator, 7kW · 1500 rpm · 1-phase · 1.0 PF · 220 V / 31.8 A
- Gem Series super-attenuated sound enclosure
- S-1B remote engine control panel with control switch, shutdown bypass and preheat switch, and engine hour meter
Factory Warranty & Registration
Northern Lights covers this model with its One + Four Year limited warranty. Year one is parts and labour with no limit on hours. Year two is parts. Years three to five cover the major engine and generator components, to 2,500 hours in total.
The warranty has to be registered with Northern Lights to apply. Travel, removal and reinstallation costs are not covered.
Standard Features of the M773LW3GN
These features are standard on every Northern Lights M773LW3GN.
- Heavy-duty engine
- Freshwater cooling system with integral cast iron exhaust manifold, expansion tank, heat exchanger and raw-water pump
- Water-cooled stainless steel exhaust elbow with high-temperature safety shutdown switch
- Coolant recovery system
- Oil drain system with shut-off valve, plumbed to the base pan
- Cleanable air filter element with intake silencing system
- Engine-mounted spin-on fuel filter
- USCG A-1 / ISO 7840 fuel lines plumbed to connections on the base pan
- Marine-grade negative-ground electrical system with battery-charging alternator, 12V or 24V
- Northern Lights brushless generator with voltage regulator
- Automatic safety shutdown for low oil pressure, high coolant temperature and high exhaust temperature
- Belt guard
- Steel base pan with integral drip sump
- Stainless steel fasteners
- Marine-quality, corrosion-resistant gloss white finish
- Load tested at the factory
- Shipped with oil
- Operator's and parts manuals
- Lloyd's Register type approval
Options for the M773LW3GN
Northern Lights options we supply and fit, beyond what this unit already includes. Ask us which ones suit your installation.
S-3C Control Panel
Adds a DC voltmeter and water temperature and oil pressure gauges to what the standard S-1B panel shows.
TSC Controller
The Tough Series Controller, with a start and stop remote panel available for a second station.
Gas & Water Separator
Sends the cooling water out under the hull and the exhaust gas out at the transom, without the noise of splashing.
On-Board Spare Parts Kits
Belts, gaskets, O-rings and pump parts. The Standard Kit covers basic repairs and the World Class Kit suits longer voyages.
M773LW3GN Technical Specifications
- Output (50 Hz)
- 7kW · 1500 rpm · 1-phase · 1.0 PF · 220 V / 31.8 A
- Output (60 Hz)
- 9kW · 1800 rpm · 1-phase · 1.0 PF · 120/240 V / 37.5 A · 120 V / 75 A
- Phase
- 1-phase (3-phase optional)
- Voltage regulation
- ±1%
- Engine
- Vertical inline 3-cylinder diesel
- Aspiration
- Naturally aspirated
- Displacement
- 1.13 L (69 in³)
- Bore / stroke
- 77 / 81 mm (3.03 / 3.19 in)
- Output (hp @ rpm)
- 15 hp @ 1800 rpm · 12 hp @ 1500 rpm
- Fuel, full load
- 2.72 L/h @ 1500 rpm · 3.52 L/h @ 1800 rpm
- Fuel, half load
- 1.40 L/h @ 1500 rpm · 1.93 L/h @ 1800 rpm
- Lubrication
- 6.5 L capacity · 200-hour change interval
- Dry weight
- 244 kg (537 lb)
- Dimensions (L × W × H)
- 831 × 442 × 603 mm
- Sound enclosure (L × W × H)
- 888 × 559 × 617 mm
- Sound enclosure weight
- 19.5 kg (43 lb)
- Wet exhaust elbow
- 51 mm (2 in) OD
- Raw-water inlet
- 19 mm (3/4 in) OD
- Fuel inlet / return
- 1/4 NPT
- Emissions
- US EPA Tier III (60 Hz) · IMO Tier II (50 Hz)
- Classification
- Lloyd's Register type approved · CE
Features & Engineering
Engine Block
Four-cycle, 3-cylinder, liquid-cooled, naturally aspirated, overhead-valve diesel with glow plugs for quick starting. Swirl combustion chambers improve fuel efficiency and reduce smoke.
Cooling System
Standard heat-exchanger cooling with optional keel cooling. The copper-nickel, tube-type heat exchanger has removable rubber end caps for easy cleaning and no need for zincs. The bronze and stainless-steel seawater pump with rubber impeller is gear driven, eliminating a potential failure point.
Fuel System
The self-venting fuel system features an inline injection pump with a 3 to 5% mechanical governor for close AC frequency control. The stop solenoid acts directly on the fuel rack, eliminating external linkage problems. The fuel lift pump is mechanical with a hand primer, eliminating electronic pump failures. Flexible fuel lines are plumbed to the base pan as standard.
Intake & Exhaust
Meets US EPA Tier III at 60 Hz and IMO Tier II at 50 Hz. The cast-aluminium intake manifold with Sound Maze system reduces noise, and the washable air cleaner makes routine maintenance simple. The wet exhaust elbow is stainless steel.
Lubrication System
The closed crankcase vent system traps oil vapour and keeps the engine room clean. 6.5 L oil capacity for better lubrication and 200-hour oil-change intervals. An oil-drain hose with valve is plumbed to the base pan as standard.
DC Electrical System
A 12-volt starter motor and battery-charging alternator with belt guard. Supplied with a remote-mount control panel, hour meter, stop-start switch with run light and preheat switch. The standard panel can be expanded to six panels, up to 34 m (110 ft) from the generator. Low oil pressure, high coolant temperature and high exhaust temperature safety shutdowns are standard.
AC Generator
The Northern Lights direct-coupled, four-pole, four-lead generator has Class "H" insulation, a pre-lubricated bearing and a conservative 95 °C / 50 °C ambient heat-rise rating. The automatic voltage regulator gives ±1% regulation and is protected by a dedicated circuit breaker.
Additional Options
Ignition-protected option available, tested to meet the criteria for petrol/outboard-engine boats.
Your Authorised Northern Lights Dealer in Australia
Marine Solutions Australia is one of only a handful of authorised Northern Lights dealers in Australia. We also size the generator to your vessel, install and commission it, and provide ongoing servicing.
Authorised Dealer
Sizing
We calculate your vessel's electrical requirements before you order, helping you choose a generator that can handle the load without being oversized.
Installation & Commissioning
Exhaust, cooling, mounts and the electrical tie-in, then a sea trial, done by our own engineers at Gold Coast City Marina.
Servicing
Scheduled services and genuine Northern Lights parts, from technicians trained on these engines.
Technical Support
Call our workshop and speak with a technician who services Northern Lights generators.
Looking for a Different Size?
Go back to the full range to compare every Northern Lights generator listed by price, output and availability.
*Black Friday Offer: *Offer ends on Friday 27 November 2026 1600 AEST. *The retail price includes sea freight to the Gold Coast City Marina, Coomera. *Discount is off the MSA retail price as listed on the website. 15% off Northern Lights generators is strictly applicable to floor stock only, 10% off Northern Lights generators applies to factory order from 4.5kW to 26kW only and 20% off installation labour applies only in conjunction with a new Northern Lights generator purchase either floor stock or factory order and excludes consumables and any additional parts that may be required. *Excludes any additional delivery/freight or a change to airfreight, however if requested this can be quoted at an additional cost, not applicable on parts and not available with any other offer or discount. *Prices are current as at 12 November 2026 and may change at any given time. *Images are for illustrative purposes only and the generator supplied may differ in appearance.
Stock is subject to prior sale. All sales are subject to our Terms & Conditions.