Black Friday 10% off all floor stock*, 15% off Northern Lights Generators in stock*, 10% off Northern Lights Generator factory order* plus 20% off installation labour with your purchase* Offer ends 27 November 2026, *Terms & Conditions Apply
Northern Lights 33kW marine generator in its sound enclosure
Factory order
Output
33kW, 50 Hz
Phase
1 or 3-phase
Weight
1140 kg, low-profile set
Dimensions
1630 × 787 × 1021 mm

Image for illustration only. The generator supplied may differ in appearance, depending on the model and the options ordered.

Model M1064D
Northern Lights Authorised
Dealer

Northern Lights 33kW Marine Generator

POA

We have not published a price for this model yet. Call 07 5612 7161 and we will put one in writing.

  • Estimated delivery: approximately 6 weeks from order confirmation, subject to factory availability and shipping schedules.
  • 12V or 24V starting at the same price. Tell us which when you order.
07 5612 7161

Supplied, installed and serviced by Marine Solutions Australia, one of only a handful of authorised Northern Lights dealers in Australia.

Included

What You Get with the 33kW

  • Northern Lights M1064D generator, 33kW · 1500 rpm · 3-phase · 0.8 PF
  • Gem Series super-attenuated sound enclosure
  • S-3C control panel with control switch, shutdown bypass switch, engine hour meter, oil pressure gauge, water temperature gauge and DC voltmeter
  • Controller mounted in the enclosure
Warranty

Factory Warranty & Registration

Northern Lights covers this model with its limited warranty: 12 months from delivery, parts and labour, with no limit on hours.

The warranty has to be registered with Northern Lights to apply. Travel, removal and reinstallation costs are not covered.

Standard Features of the M1064D

These features are standard on every Northern Lights M1064D.

  • Lugger four-cylinder, four-cycle, inline, liquid-cooled, overhead-valve marine diesel
  • Balanced, forged crankshaft with induction-hardened journals
  • Dual gear-driven, counter-rotating balance shafts
  • Replaceable wet cylinder liners
  • Direct fuel injection, with ring-clamp fuel filter, air bleed and drain
  • Mechanical fuel transfer pump with manual priming lever
  • Flexible fuel lines to a fuel manifold on the base frame
  • 500-hour oil change interval, when fuel and oil requirements are met
  • Full-flow spin-on oil filter and freshwater plate-type oil cooler
  • Freshwater cooling with two thermostats
  • Heat-exchanger cooling with gear-driven seawater pump and cupro-nickel heat exchanger
  • Zinc anode electrolysis protection
  • S-3B remote-mount control panel with engine hour meter, coolant temperature and oil pressure gauges, DC voltmeter, start-stop and shutdown bypass switches
  • Automatic safety shutdown for low oil pressure and high coolant temperature
  • 12-volt DC system with circuit breaker, starter motor and charging alternator
  • Northern Lights brushless generator, twelve-lead reconnectable, Class H insulation
  • Voltage regulated to ±0.5% from no load to full load
  • Hydrolastic mounts, isolating 98% of vibration from the hull
  • Welded steel base frame with drip pan
  • Belt guard
  • Two-part polyurethane gloss white paint
  • Operator's and parts manuals
Accessories & Upgrades

Options for the M1064D

Northern Lights options we supply and fit, beyond what this unit already includes. Ask us which ones suit your installation.

Gas & Water Separator

Sends the cooling water out under the hull and the exhaust gas out at the transom, without the noise of splashing.

On-Board Spare Parts Kits

Belts, gaskets, O-rings and pump parts. The Standard Kit covers basic repairs and the World Class Kit suits longer voyages.

Specifications

M1064D Technical Specifications

Output (50 Hz)
33kW · 1500 rpm · 3-phase · 0.8 PF
Output (60 Hz)
40kW · 1800 rpm · 3-phase · 0.8 PF
Phase
3-phase (1-phase available)
Voltage regulation
±0.5% (PMG optional)
Engine
Lugger inline 4-cylinder, 4-cycle diesel
Aspiration
Naturally aspirated
Displacement
4.5 L (276 in³)
Bore / stroke
106 / 127 mm (4.19 / 5 in)
Output (hp @ rpm)
67 hp @ 1800 rpm · 59 hp @ 1500 rpm
Fuel, full load
10.37 L/h @ 1500 rpm · 12.45 L/h @ 1800 rpm
Lubrication
13.5 L capacity · 500-hour change interval
Dry weight
1140 kg (2513 lb), low-profile set
Dimensions (L × W × H)
1630 × 787 × 1021 mm
Sound enclosure (L × W × H)
1905 × 965 × 1039 mm
Sound enclosure weight
152 kg (336 lb)
Wet exhaust elbow
100 mm (4 in) OD
Raw-water inlet
32 mm (1.25 in) hose ID
Fuel inlet / return
9.5 mm (3/8 in) minimum line
Features & Engineering

Engine Block

Lugger four-cylinder, four-cycle, inline, liquid-cooled, overhead-valve marine diesel on a heavy-duty industrial block. Balanced, forged crankshaft with induction-hardened journals, replaceable wet cylinder liners, and dual gear-driven counter-rotating balance shafts for smooth running.

Fuel System

Direct fuel injection with a rotary mechanical injection pump. Ring-clamp fuel filter with air bleed and drain, and a mechanically driven diaphragm transfer pump with manual priming lever.

Lubrication System

500-hour oil change interval when fuel and oil requirements are met. Gear-type oil pump, full-flow spin-on filter, oil-spray piston cooling and a freshwater plate-type oil cooler.

Cooling System

Freshwater cooling with two thermostats. Heat-exchanger cooling with a gear-driven, flexible-impeller seawater pump and a cupro-nickel tube-type heat exchanger. Zinc anode electrolysis protection. A keel-cooled version is available.

DC Electrical System

Standard S-3B remote-mount control panel with engine hour meter, coolant temperature and oil pressure gauges, DC voltmeter, start-stop and shutdown bypass switches. Low oil pressure and high coolant temperature shutdowns. 12-volt system as standard, 24-volt optional.

AC Generator

Direct-coupled, single-bearing, twelve-lead, reconnectable brushless generator with Class H insulation and a 95 °C / 50 °C heat-rise rating. Voltage regulated to ±0.5% from no load to full load. A permanent magnet generator for 300% short-circuit capability is optional.

Mounting

Hydrolastic mounts isolate 98% of vibration from the hull. Welded steel base frame with drip pan. A low-profile sound enclosure is optional.

Dealer Support

Your Authorised Northern Lights Dealer in Australia

Marine Solutions Australia is one of only a handful of authorised Northern Lights dealers in Australia. We also size the generator to your vessel, install and commission it, and provide ongoing servicing.

Northern Lights Authorised Dealer

Sizing

We calculate your vessel's electrical requirements before you order, helping you choose a generator that can handle the load without being oversized.

Installation & Commissioning

Exhaust, cooling, mounts and the electrical tie-in, then a sea trial, done by our own engineers at Gold Coast City Marina.

Servicing

Scheduled services and genuine Northern Lights parts, from technicians trained on these engines.

Technical Support

Call our workshop and speak with a technician who services Northern Lights generators.

Aerial view of a motor boat carving a circular wake across clear blue water

Looking for a Different Size?

Go back to the full range to compare every Northern Lights generator listed by price, output and availability.

*Black Friday Offer: *Offer ends on Friday 27 November 2026 1600 AEST. *The retail price includes sea freight to the Gold Coast City Marina, Coomera. *Discount is off the MSA retail price as listed on the website. 15% off Northern Lights generators is strictly applicable to floor stock only, 10% off Northern Lights generators applies to factory order from 4.5kW to 26kW only and 20% off installation labour applies only in conjunction with a new Northern Lights generator purchase either floor stock or factory order and excludes consumables and any additional parts that may be required. *Excludes any additional delivery/freight or a change to airfreight, however if requested this can be quoted at an additional cost, not applicable on parts and not available with any other offer or discount. *Prices are current as at 12 November 2026 and may change at any given time. *Images are for illustrative purposes only and the generator supplied may differ in appearance.

Stock is subject to prior sale. All sales are subject to our Terms & Conditions.

Call