Black Friday 10% off all floor stock*, 15% off Northern Lights Generators in stock*, 10% off Northern Lights Generator factory order* plus 20% off installation labour with your purchase* Offer ends 27 November 2026, *Terms & Conditions Apply
Northern Lights Authorised Dealer

Northern Lights Generator Accessories

Factory-built options for the Northern Lights generators we supply. Built in at the factory, they save costly changes to the installation later. Tell us which generator and vessel you have, and we'll recommend suitable accessories.

Supplied, installed and serviced by Marine Solutions Australia, one of only a handful of authorised Northern Lights dealers in Australia.

Sound Enclosures

Every priced generator in our range already has its Gem Series sound enclosure in the price.

Northern Lights Gem Series Sound Enclosures

Gem Series Sound Enclosures

The enclosure shares a base frame with the generator, so the two sit as one compact package that cuts noise and saves engine room space. Faceted corners and fewer screws, nuts and brackets make it simple to assemble.

Made for the 4.5kW to 32kW generators at 50 Hz (5kW to 38kW at 60 Hz).

Sound Enclosure Sizes

The Gem Series enclosure for each generator in our range, from the Northern Lights specifications.

Generator Output Enclosure (L × W × H) Weight
M673LD3G 4.5kW 724 × 498 × 532 mm 15.4 kg (34 lb)
M673L3G 5kW 724 × 498 × 532 mm 15.4 kg (34 lb)
M773LW3GN 7kW 888 × 559 × 617 mm 19.5 kg (43 lb)
M843NW3G 10kW 986 × 574 × 655 mm 24 kg (53 lb)
M844DW3G 14kW 1170 × 572 × 714 mm 26.7 kg (59 lb)
M844LW3G 16kW 1169 × 572 × 714 mm 27 kg (59 lb)
M864W3G 20kW 1243 × 635 × 713 mm 25 kg (55 lb)
M944W3G 26kW 1422 × 728 × 815 mm 41.3 kg (91 lb)
M944W3FG 30kW (60 Hz) 1524 × 728 × 815 mm 41.3 kg (91 lb)
M944TG 32kW 1527 × 729 × 813 mm 44 kg (98 lb)
M944T3FG 38kW (60 Hz) 1629 × 729 × 815 mm 53 kg (117 lb)

Controls & Monitoring

Choose how much control you want, and where on the vessel you want it.

Northern Lights Control Panels

Control Panels

Control panels are available in 12V or 24V versions, allowing you to monitor and operate the generator from multiple locations on board.

  • S-1: run light, start and stop, and a shutdown bypass and preheat switch
  • S-1B: the S-1 with an engine hour meter
  • S-3B: adds a DC voltmeter and water temperature and oil pressure gauges, in its own enclosure
  • S-3C: the same gauges in a compact flush-mount panel, with an enclosure available
  • S-4: adds AC voltage, frequency and current, flush mounted or in an enclosure

Exhaust Options

Parts for a wet or dry exhaust, set up for a quiet installation.

Northern Lights Gas & Water Separator

Gas & Water Separator

Splits the exhaust gas from the cooling water. The gas leaves at the transom and the water exits under the hull, without the noise of splashing.

Northern Lights Siphon Break

Siphon Break

Stops raw water siphoning back into the engine. For wet exhaust systems only.

Standard on the 4.5kW and 5kW, and available for the larger generators.

Northern Lights Dry Exhaust Flex

Dry Exhaust Flex

Connects a dry exhaust system to the engine and cuts the vibration it carries. It lets the muffler be mounted remotely and takes up the thermal expansion of the exhaust.

Mounting Systems

The base frame is built for low vibration. Compound mounts reduce it further.

Northern Lights Compound Mounts

Compound Mounts

Fitted under the base frame, compound mounts neutralise the noise that base-frame vibration carries into the hull. They are corrosion protected for the marine environment and add very little height.

Pair them with a sound enclosure for even more noise reduction.

Fuel & Power

Options that change how the generator draws its fuel and what else it can drive.

Northern Lights Power Take-Off

Power Take-Off

A front power take-off runs hydraulic thrusters, windlasses or sail equipment from the generator at the flip of a switch.

Available on the 10kW and larger, in 12 or 24 volt.

Northern Lights High Output Alternator

High Output Alternator

Adds battery charging capacity. An adjustable voltage regulator for lead-acid or gel-cell batteries is optional.

Available on the larger generators. Ask us about yours.

Northern Lights Electric Fuel Pump

Electric Fuel Pump

Lets the fuel tank sit further from the generator and makes bleeding the fuel system easier.

12 volt for every generator, and 24 volt for the 7kW and larger.

Spare Parts Kits

Carry the parts for routine maintenance and fault-finding when you are well away from port.

Northern Lights On-Board Spare Parts Kits

On-Board Spare Parts Kits

Belts, gaskets, O-rings, pump parts and more, packed and organised. The Standard Kit holds the basic repair parts, and the World Class Kit equips you for longer voyages.

Each kit is made for its generator, in heat-exchanger and keel-cooled versions.

Aerial view of a motor boat carving a circular wake across clear blue water

Choosing the Generator First?

Compare every Northern Lights generator we list by price, output and availability, then add the accessories your installation needs.

Call