- Output
- 32kW, 50 Hz
- Phase
- 1 or 3-phase
- Weight
- 630 kg
- Dimensions
- 1433 × 653 × 813 mm
Image for illustration only. The generator supplied may differ in appearance, depending on the model and the options ordered.
AuthorisedDealer
Northern Lights 32kW Marine Generator
We have not published a price for this model yet. Call 07 5612 7161 and we will put one in writing.
- Estimated delivery: approximately 6 weeks from order confirmation, subject to factory availability and shipping schedules.
- 12V or 24V starting at the same price. Tell us which when you order.
Supplied, installed and serviced by Marine Solutions Australia, one of only a handful of authorised Northern Lights dealers in Australia.
What You Get with the 32kW
- Northern Lights M944TG generator, 32kW · 1500 rpm · 220 V / 145 A
- Gem Series super-attenuated sound enclosure
- S-3C control panel with control switch, shutdown bypass switch, engine hour meter, oil pressure gauge, water temperature gauge and DC voltmeter
- Controller mounted in the enclosure
Factory Warranty & Registration
Northern Lights covers this model with its limited warranty: 12 months from delivery, parts and labour, with no limit on hours.
The warranty has to be registered with Northern Lights to apply. Travel, removal and reinstallation costs are not covered.
Standard Features of the M944TG
These features are standard on every Northern Lights M944TG.
- Heavy-duty diesel engine
- Freshwater cooling system with heat exchanger, expansion tank and raw-water pump
- Freshwater-cooled cast iron exhaust manifold
- Water-cooled stainless steel exhaust elbow with high-temperature safety shutdown switch
- Oil drain system with shut-off valve, plumbed to the base pan
- Cleanable air filter element with intake silencer
- Engine-mounted spin-on fuel filter
- USCG A-1 / ISO 7840 fuel lines plumbed to connections on the base pan
- Marine-grade standard-ground electrical system, 12V or 24V
- Northern Lights brushless generator with voltage regulator, 12-wire reconnectable for single-phase or 3-phase
- Automatic safety shutdown for low oil pressure, high coolant temperature and high exhaust temperature
- One-side service
- Belt guard
- Steel base frame with drip sump
- Stainless steel fasteners
- Two-part polyurethane gloss white paint
- Load tested at the factory
- Operator's and parts manuals
Options for the M944TG
Northern Lights options we supply and fit, beyond what this unit already includes. Ask us which ones suit your installation.
TSC Controller
The Tough Series Controller, with a start and stop remote panel available for a second station.
Gas & Water Separator
Sends the cooling water out under the hull and the exhaust gas out at the transom, without the noise of splashing.
On-Board Spare Parts Kits
Belts, gaskets, O-rings and pump parts. The Standard Kit covers basic repairs and the World Class Kit suits longer voyages.
M944TG Technical Specifications
- Output (50 Hz)
- 32kW · 1500 rpm · 220 V / 145 A
- Output (60 Hz)
- 38kW · 1800 rpm · 120/240 V / 158.3 A · 120 V / 316.6 A
- Phase
- 1-phase (3-phase optional)
- Voltage regulation
- ±1%
- Engine
- Vertical inline 4-cylinder diesel
- Aspiration
- Turbocharged
- Displacement
- 3.3 L (203 in³)
- Bore / stroke
- 94 / 120 mm (3.70 / 4.72 in)
- Output (hp @ rpm)
- 60 hp @ 1800 rpm · 50 hp @ 1500 rpm
- Fuel, full load
- 8.82 L/h @ 1500 rpm · 12.34 L/h @ 1800 rpm
- Fuel, half load
- 5.03 L/h @ 1500 rpm · 6.05 L/h @ 1800 rpm
- Lubrication
- 10 L capacity · 250-hour change interval
- Dry weight
- 630 kg (1388 lb)
- Dimensions (L × W × H)
- 1433 × 653 × 813 mm
- Sound enclosure (L × W × H)
- 1527 × 729 × 813 mm
- Sound enclosure weight
- 44 kg (98 lb)
- Wet exhaust elbow
- 76 mm (3 in) OD
- Raw-water inlet
- 19 mm (3/4 in) OD
- Fuel inlet / return
- 1/4 NPT
- Emissions
- IMO Tier II compliant
- Classification
- Lloyd's Register type approved · CE
Features & Engineering
Engine Block
Four-cycle, 4-cylinder, liquid-cooled, turbocharged, overhead-valve diesel. The induction-hardened, forged carbon-steel crankshaft is stronger than cast iron, while the cross-flow head makes for efficient combustion. A helical-cut gear train reduces noise.
Cooling System
Standard heat-exchanger cooling with optional keel cooling. The copper-nickel, tube-type heat exchanger has removable end caps for easy cleaning. Electrolysis protection via zinc anode. The bronze and stainless-steel seawater pump with rubber impeller is gear driven, eliminating a potential failure point.
Fuel System
The self-venting fuel system features an inline injection pump with a 3 to 5% mechanical governor for close AC frequency control. The fuel lift pump is mechanical with a hand primer, eliminating electronic pump failures.
Intake & Exhaust
Meets IMO Tier II emission standards. The wet exhaust elbow is stainless steel.
Lubrication System
The closed crankcase vent system traps oil vapour and keeps the engine room clean. 10 L oil capacity for better lubrication and 250-hour oil-change intervals. An oil-drain hose with valve is plumbed to the base pan as standard.
DC Electrical System
A 12-volt starter motor and battery-charging alternator with belt guard. Supplied with a remote-mount control panel, hour meter, stop-start switch, engine gauges and preheat switch. The standard panel can be expanded to six panels, up to 34 m (110 ft) from the generator. Gauges include oil pressure, coolant temperature and DC voltage. Low oil pressure, high coolant temperature and high exhaust temperature safety shutdowns are standard.
AC Generator
The Northern Lights direct-coupled, four-pole, twelve-lead generator has Class "H" insulation, a pre-lubricated bearing and a conservative 95 °C / 50 °C ambient heat-rise rating. The external automatic voltage regulator is powered by a dedicated AC winding for true 300% short-circuit protection.
Your Authorised Northern Lights Dealer in Australia
Marine Solutions Australia is one of only a handful of authorised Northern Lights dealers in Australia. We also size the generator to your vessel, install and commission it, and provide ongoing servicing.
Authorised Dealer
Sizing
We calculate your vessel's electrical requirements before you order, helping you choose a generator that can handle the load without being oversized.
Installation & Commissioning
Exhaust, cooling, mounts and the electrical tie-in, then a sea trial, done by our own engineers at Gold Coast City Marina.
Servicing
Scheduled services and genuine Northern Lights parts, from technicians trained on these engines.
Technical Support
Call our workshop and speak with a technician who services Northern Lights generators.
Looking for a Different Size?
Go back to the full range to compare every Northern Lights generator listed by price, output and availability.
*Black Friday Offer: *Offer ends on Friday 27 November 2026 1600 AEST. *The retail price includes sea freight to the Gold Coast City Marina, Coomera. *Discount is off the MSA retail price as listed on the website. 15% off Northern Lights generators is strictly applicable to floor stock only, 10% off Northern Lights generators applies to factory order from 4.5kW to 26kW only and 20% off installation labour applies only in conjunction with a new Northern Lights generator purchase either floor stock or factory order and excludes consumables and any additional parts that may be required. *Excludes any additional delivery/freight or a change to airfreight, however if requested this can be quoted at an additional cost, not applicable on parts and not available with any other offer or discount. *Prices are current as at 12 November 2026 and may change at any given time. *Images are for illustrative purposes only and the generator supplied may differ in appearance.
Stock is subject to prior sale. All sales are subject to our Terms & Conditions.