Spot Zero Water Maker
From ocean to onboard, freshwater made simple.
From ocean to onboard, freshwater made simple.
The next-generation Spot Zero Water Maker turns seawater into reliable fresh water with quieter operation, improved efficiency and a compact footprint. The simplified design also reduces installation complexity.
Make fresh water anytime, anywhere, extend your cruising range, stay off the dock longer and forget about rationing. Push-to-start operation and built-in redundancy keep it running even in tough offshore conditions.
BlueLink Connectivity
MFD and smart-device integration with over-the-air remote support and updates.
Built-in Dual Redundancy
Manual override modes, hand control or electronic precision, keep you running.
Effortless Operation
Push-to-start and self-maintaining; designed for DIY-friendly upkeep.
95% Plumbing Reduction
95% fewer connections, reducing installation time and potential leak points.
33% Smaller Footprint
Fits where others can’t, engineered to maximise utility space.
65% Quieter Operation
New low-vibration architecture, designed to disappear.
Ideal for
- Captains & crew, push-to-start, DIY-friendly maintenance
- Owners, endless fresh water and showers without rationing
- OEMs & builders, compact installs in space-constrained hulls
Spot Zero Water Maker, full specifications
Transcribed from the official Spot Zero sales sheet. Configured for Australian 230 V / 50 Hz power; we’ll size the right model for your vessel.
Capacity by model
| Model | Per hour | Per day |
|---|---|---|
| Water Maker 600 | 95 L/h (25 GPH) | 2,271 L/day (600 GPD) |
| Water Maker 900 | 144 L/h (38 GPH) | 3,407 L/day (900 GPD) |
| Water Maker 1200 | 190 L/h (50 GPH) | 4,542 L/day (1,200 GPD) |
| Water Maker 1800 | 284 L/h (75 GPH) | 6,814 L/day (1,800 GPD) |
| Water Maker 2200 | 348 L/h (92 GPH) | 8,329 L/day (2,200 GPD) |
Electrical requirements
| Specification | Detail |
|---|---|
| Voltage | 230 VAC |
| Max amp draw | 14 A @ 230 V |
| Frequency | 50 / 60 Hz |
| Phase | Single or three phase |
Process & build
| Specification | Detail |
|---|---|
| Process | Reverse-osmosis seawater desalination |
| Water maker unit | 533 × 342 × 342 mm (21 × 13.5 × 13.5 in) |
| Unit weight | 54 kg (119 lb) |
| System components | Water maker, fresh-water flush, pre-filter, boost pump |
Specifications transcribed from Spot Zero sales sheets and subject to change without notice. Full datasheets and CAD drawings are available on request.
Supply, install & service, Australia-wide
Marine Solutions Australia is an authorised Spot Zero dealer. We size the right system for your vessel, install and commission it at Gold Coast City Marina or on site across the Gold Coast, Queensland and New South Wales, and back it with ongoing servicing and spares support, supplying nationally as an authorised dealer.
Spot Zero Water Maker, common questions
How much fresh water can a Spot Zero Water Maker produce?
Output ranges from 95 L/h for the Water Maker 600 to 348 L/h for the Water Maker 2200. The larger model can produce up to 8,329 litres of fresh water from seawater per day. We’ll size the right model to your tankage and usage.
Will it run on Australian power?
Yes. The Water Maker runs on 230 VAC, 50/60 Hz, single or three phase, drawing a maximum of 14 A at 230 V.
Is it noisy?
No. The next-generation unit uses a low-vibration design that is 65% quieter and 33% smaller, making it easier to install and live with aboard.
Can I add purification later?
Yes. Pair the Water Maker with a Spot Zero Water Purifier, or choose the Combination System to desalinate and double-pass purify in a single integrated unit.
Didn’t find your answer? Call 07 5612 7161 (Mon to Fri 7am-3pm) or contact us. We’re happy to talk it through.
Talk to us about the Spot Zero Water Maker
Tell us about your vessel and we’ll size, supply, install and service the right Spot Zero system, quoted per unit, obligation-free.