Black Friday 10% off all floor stock*, 15% off Northern Lights Generators in stock*, 10% off Northern Lights Generator factory order* plus 20% off installation labour with your purchase* Offer ends 27 November 2026, *Terms & Conditions Apply
Northern Lights 4.5kW marine generator in its sound enclosure
Factory order
Output
4.5kW, 50 Hz
Phase
1-phase
Weight
168 kg
Dimensions
698 × 426 × 521 mm

Image for illustration only. The generator supplied may differ in appearance, depending on the model and the options ordered.

Model M673LD3G
Northern Lights Authorised
Dealer

Northern Lights 4.5kW Marine Generator

Black Friday Offer: 10% Off* Usually $38,091 + gst
$34,282 + gst*
  • Black Friday offer price until 27 November 2026, with 20% off installation labour. Not available with any other offer.*
  • Estimated delivery: approximately 6 weeks from order confirmation, subject to factory availability and shipping schedules.
  • 12V or 24V starting at the same price. Tell us which when you order.
  • Sea freight to Gold Coast City Marina, Coomera, is included.
  • Installation and delivery elsewhere are quoted separately.
07 5612 7161

Supplied, installed and serviced by Marine Solutions Australia, one of only a handful of authorised Northern Lights dealers in Australia.

In the Price

What You Get with the 4.5kW

  • Northern Lights M673LD3G generator, 4.5kW · 1500 rpm · 1-phase · 1.0 PF · 220 V / 20.5 A
  • Gem Series super-attenuated sound enclosure
  • S-1B remote engine control panel with control switch, shutdown bypass and preheat switch, and engine hour meter
Warranty

Factory Warranty & Registration

Northern Lights covers this model with its One + Four Year limited warranty. Year one is parts and labour with no limit on hours. Year two is parts. Years three to five cover the major engine and generator components, to 2,500 hours in total.

The warranty has to be registered with Northern Lights to apply. Travel, removal and reinstallation costs are not covered.

Standard Features of the M673LD3G

These features are standard on every Northern Lights M673LD3G.

  • Heavy-duty base engine
  • Freshwater cooling system with expansion tank and exhaust manifold
  • Water-cooled stainless steel exhaust elbow with high-temperature safety shutdown switch
  • Coolant recovery system
  • Oil drain hose with cap
  • Spin-on fuel filter
  • USCG / ISO 7840 fuel lines plumbed to the base frame
  • Standard-ground DC electrical system, 12V or 24V
  • Northern Lights generator with voltage regulator
  • Automatic safety shutdown for low oil pressure, high coolant temperature and high exhaust temperature
  • AC circuit breakers for the generator and voltage regulator
  • Engine DC circuit breaker
  • Belt guard
  • Siphon break
  • Stainless steel base pan with platform anti-vibration mounts
  • Stainless steel fasteners
  • Marine-quality, corrosion-resistant gloss white finish
  • Load tested at the factory
  • Shipped with oil
  • Operator's and parts manuals
  • Lloyd's Register type approval
Accessories & Upgrades

Options for the M673LD3G

Northern Lights options we supply and fit, beyond what this unit already includes. Ask us which ones suit your installation.

S-3C Control Panel

Adds a DC voltmeter and water temperature and oil pressure gauges to what the standard S-1B panel shows.

TSC Controller

The Tough Series Controller, with a start and stop remote panel available for a second station.

Gas & Water Separator

Sends the cooling water out under the hull and the exhaust gas out at the transom, without the noise of splashing.

On-Board Spare Parts Kits

Belts, gaskets, O-rings and pump parts. The Standard Kit covers basic repairs and the World Class Kit suits longer voyages.

Specifications

M673LD3G Technical Specifications

Output (50 Hz)
4.5kW · 1500 rpm · 1-phase · 1.0 PF · 220 V / 20.5 A
Output (60 Hz)
5kW · 1800 rpm · 1-phase · 1.0 PF · 240 V / 20.8 A · 120 V / 41.6 A
Phase
1-phase
Voltage regulation
±5%
Engine
Vertical inline 3-cylinder diesel
Aspiration
Naturally aspirated
Displacement
0.761 L (46.4 in³)
Bore / stroke
67 / 72 mm (2.64 / 2.83 in)
Output (hp @ rpm)
10.1 hp @ 1800 rpm · 8.4 hp @ 1500 rpm
Fuel, full load
1.9 L/h @ 1500 rpm · 2.2 L/h @ 1800 rpm
Fuel, half load
1.1 L/h @ 1500 rpm · 1.2 L/h @ 1800 rpm
Lubrication
3 L capacity · 200-hour change interval
Dry weight
168 kg (371 lb)
Dimensions (L × W × H)
698 × 426 × 521 mm
Sound enclosure (L × W × H)
724 × 498 × 532 mm
Sound enclosure weight
15.4 kg (34 lb)
Wet exhaust elbow
38 mm (1.5 in) OD
Raw-water inlet
19 mm (3/4 in) OD
Fuel inlet / return
1/4 NPT
Emissions
US EPA Tier III (60 Hz) · IMO Tier II (50 Hz)
Classification
Lloyd's Register type approved · CE
Features & Engineering

Engine Block

Four-cycle, 3-cylinder, liquid-cooled, naturally aspirated, overhead-valve diesel with glow plugs for quick starting. Swirl combustion chambers improve fuel efficiency and reduce smoke.

Cooling System

Standard heat-exchanger cooling with optional keel cooling. The copper-nickel, tube-type heat exchanger has removable rubber end caps for easy cleaning and no need for zincs. The bronze and stainless-steel seawater pump with rubber impeller is gear driven, eliminating a potential failure point.

Fuel System

The self-venting fuel system features an inline injection pump with a 3 to 5% mechanical governor for close AC frequency control. The stop solenoid acts directly on the fuel rack, eliminating external linkage problems. The fuel lift pump is mechanical with a hand primer, eliminating electronic pump failures. Flexible fuel lines are plumbed to the base pan as standard.

Intake & Exhaust

Meets US EPA Tier III at 60 Hz and IMO Tier II at 50 Hz. The cast-aluminium intake manifold with Sound Maze system reduces noise, and the washable air cleaner makes routine maintenance simple. The wet exhaust elbow is stainless steel.

Lubrication System

The closed crankcase vent system traps oil vapour and keeps the engine room clean. 3 L oil capacity for better lubrication and 200-hour oil-change intervals. An oil-drain hose allows for ease of maintenance.

DC Electrical System

A 12-volt starter motor and battery-charging alternator with belt guard. Supplied with a remote-mount control panel, hour meter, stop-start switch with run light and preheat switch. The standard panel can be expanded to six panels, up to 34 m (110 ft) from the generator. Low oil pressure, high coolant temperature and high exhaust temperature safety shutdowns are standard.

AC Generator

The Northern Lights direct-coupled, four-pole, four-lead generator has Class "H" insulation, a pre-lubricated bearing and a conservative 95 °C / 50 °C ambient heat-rise rating. The automatic voltage regulator gives ±5% regulation and is protected by a dedicated circuit breaker.

Dealer Support

Your Authorised Northern Lights Dealer in Australia

Marine Solutions Australia is one of only a handful of authorised Northern Lights dealers in Australia. We also size the generator to your vessel, install and commission it, and provide ongoing servicing.

Northern Lights Authorised Dealer

Sizing

We calculate your vessel's electrical requirements before you order, helping you choose a generator that can handle the load without being oversized.

Installation & Commissioning

Exhaust, cooling, mounts and the electrical tie-in, then a sea trial, done by our own engineers at Gold Coast City Marina.

Servicing

Scheduled services and genuine Northern Lights parts, from technicians trained on these engines.

Technical Support

Call our workshop and speak with a technician who services Northern Lights generators.

Aerial view of a motor boat carving a circular wake across clear blue water

Looking for a Different Size?

Go back to the full range to compare every Northern Lights generator listed by price, output and availability.

*Black Friday Offer: *Offer ends on Friday 27 November 2026 1600 AEST. *The retail price includes sea freight to the Gold Coast City Marina, Coomera. *Discount is off the MSA retail price as listed on the website. 15% off Northern Lights generators is strictly applicable to floor stock only, 10% off Northern Lights generators applies to factory order from 4.5kW to 26kW only and 20% off installation labour applies only in conjunction with a new Northern Lights generator purchase either floor stock or factory order and excludes consumables and any additional parts that may be required. *Excludes any additional delivery/freight or a change to airfreight, however if requested this can be quoted at an additional cost, not applicable on parts and not available with any other offer or discount. *Prices are current as at 12 November 2026 and may change at any given time. *Images are for illustrative purposes only and the generator supplied may differ in appearance.

Stock is subject to prior sale. All sales are subject to our Terms & Conditions.

Call