Black Friday 10% off all floor stock*, 15% off Northern Lights Generators in stock*, 10% off Northern Lights Generator factory order* plus 20% off installation labour with your purchase* Offer ends 27 November 2026, *Terms & Conditions Apply
Northern Lights 30kW marine generator in its sound enclosure
Factory order
Output
30kW, 60 Hz
Phase
1 or 3-phase
Weight
603 kg wet
Dimensions
1488 × 674 × 784 mm

Image for illustration only. The generator supplied may differ in appearance, depending on the model and the options ordered.

Model M944W3FG
Northern Lights Authorised
Dealer

Northern Lights 30kW Marine Generator

POA

We have not published a price for this model yet. Call 07 5612 7161 and we will put one in writing.

  • Estimated delivery: approximately 6 weeks from order confirmation, subject to factory availability and shipping schedules.
  • 12V or 24V starting at the same price. Tell us which when you order.
07 5612 7161

Supplied, installed and serviced by Marine Solutions Australia, one of only a handful of authorised Northern Lights dealers in Australia.

Included

What You Get with the 30kW

  • Northern Lights M944W3FG generator, 30kW · 1800 rpm · 1-phase · 1.0 PF · 120/240 V / 125 A · 120 V / 250 A
  • Gem Series super-attenuated sound enclosure
  • S-3C control panel with control switch, shutdown bypass switch, engine hour meter, oil pressure gauge, water temperature gauge and DC voltmeter
  • Controller mounted in the enclosure
Warranty

Factory Warranty & Registration

Northern Lights covers this model with its limited warranty: 12 months from delivery, parts and labour, with no limit on hours.

The warranty has to be registered with Northern Lights to apply. Travel, removal and reinstallation costs are not covered.

Standard Features of the M944W3FG

These features are standard on every Northern Lights M944W3FG.

  • Heavy-duty diesel engine
  • Freshwater cooling system with heat exchanger, expansion tank and raw-water pump
  • Freshwater-cooled cast iron exhaust manifold
  • Water-cooled stainless steel exhaust elbow with high-temperature safety shutdown switch
  • Oil drain system with shut-off valve, plumbed to the base pan
  • Cleanable air filter element with intake silencer
  • Engine-mounted spin-on fuel filter
  • USCG A-1 / ISO 7840 fuel lines plumbed to connections on the base pan
  • Marine-grade standard-ground electrical system, 12V or 24V
  • Northern Lights brushless generator with voltage regulator, 12-wire reconnectable for single-phase or 3-phase
  • Automatic safety shutdown for low oil pressure, high coolant temperature and high exhaust temperature
  • One-side service
  • Belt guard
  • Steel base frame with drip sump
  • Stainless steel fasteners
  • Two-part polyurethane gloss white paint
  • Load tested at the factory
  • Operator's and parts manuals
Accessories & Upgrades

Options for the M944W3FG

Northern Lights options we supply and fit, beyond what this unit already includes. Ask us which ones suit your installation.

TSC Controller

The Tough Series Controller, with a start and stop remote panel available for a second station.

Gas & Water Separator

Sends the cooling water out under the hull and the exhaust gas out at the transom, without the noise of splashing.

On-Board Spare Parts Kits

Belts, gaskets, O-rings and pump parts. The Standard Kit covers basic repairs and the World Class Kit suits longer voyages.

Specifications

M944W3FG Technical Specifications

Output (60 Hz)
30kW · 1800 rpm · 1-phase · 1.0 PF · 120/240 V / 125 A · 120 V / 250 A
Phase
1 & 3-phase
Voltage regulation
±1%
Engine
Vertical inline 4-cylinder diesel
Aspiration
Naturally aspirated
Displacement
3.3 L (203 in³)
Bore / stroke
94 / 120 mm (3.70 / 4.72 in)
Output (hp @ rpm)
43.5 hp @ 1800 rpm
Fuel, full load
9.80 L/h @ 1800 rpm
Fuel, half load
5.30 L/h @ 1800 rpm
Lubrication
10 L capacity · 250-hour change interval
Dry weight
603 kg (1329 lb) wet
Dimensions (L × W × H)
1488 × 674 × 784 mm
Sound enclosure (L × W × H)
1524 × 728 × 815 mm
Sound enclosure weight
41.3 kg (91 lb)
Wet exhaust elbow
76 mm (3 in) OD
Raw-water inlet
19 mm (3/4 in) OD
Fuel inlet / return
1/4 NPT
Emissions
US EPA Tier III
Classification
Lloyd's Register type approved · CE
Features & Engineering

Engine Block

Four-cycle, 4-cylinder, liquid-cooled, naturally aspirated, overhead-valve diesel with glow plugs for quick starting. The forged carbon-steel crankshaft is stronger than cast iron, while the cross-flow head makes for efficient combustion. A helical-cut gear train reduces noise.

Cooling System

Standard heat-exchanger cooling with optional keel cooling. The copper-nickel, tube-type heat exchanger has removable end caps for easy cleaning. Electrolysis protection via zinc anode. The bronze and stainless-steel seawater pump with rubber impeller is gear driven, eliminating a potential failure point.

Fuel System

The self-venting fuel system features an inline injection pump with a 3 to 5% mechanical governor for close AC frequency control. The fuel lift pump is mechanical with a hand primer, eliminating electronic pump failures.

Intake & Exhaust

Meets US EPA Tier III emission standards. The wet exhaust elbow is stainless steel.

Lubrication System

The closed crankcase vent system traps oil vapour and keeps the engine room clean. 10 L oil capacity for better lubrication and 250-hour oil-change intervals. An oil-drain hose with valve is plumbed to the base pan as standard.

DC Electrical System

A 12-volt starter motor and battery-charging alternator with belt guard. Supplied with a remote-mount control panel, hour meter, stop-start switch, engine gauges and preheat switch. The standard panel can be expanded to six panels, up to 34 m (110 ft) from the generator. Gauges include oil pressure, coolant temperature and DC voltage. Low oil pressure, high coolant temperature and high exhaust temperature safety shutdowns are standard.

AC Generator

The Northern Lights direct-coupled, four-pole, four-lead generator has Class "H" insulation, a pre-lubricated bearing and a conservative 95 °C / 50 °C ambient heat-rise rating. The external automatic voltage regulator is powered by a dedicated AC winding for true 300% short-circuit protection.

Dealer Support

Your Authorised Northern Lights Dealer in Australia

Marine Solutions Australia is one of only a handful of authorised Northern Lights dealers in Australia. We also size the generator to your vessel, install and commission it, and provide ongoing servicing.

Northern Lights Authorised Dealer

Sizing

We calculate your vessel's electrical requirements before you order, helping you choose a generator that can handle the load without being oversized.

Installation & Commissioning

Exhaust, cooling, mounts and the electrical tie-in, then a sea trial, done by our own engineers at Gold Coast City Marina.

Servicing

Scheduled services and genuine Northern Lights parts, from technicians trained on these engines.

Technical Support

Call our workshop and speak with a technician who services Northern Lights generators.

Aerial view of a motor boat carving a circular wake across clear blue water

Looking for a Different Size?

Go back to the full range to compare every Northern Lights generator listed by price, output and availability.

*Black Friday Offer: *Offer ends on Friday 27 November 2026 1600 AEST. *The retail price includes sea freight to the Gold Coast City Marina, Coomera. *Discount is off the MSA retail price as listed on the website. 15% off Northern Lights generators is strictly applicable to floor stock only, 10% off Northern Lights generators applies to factory order from 4.5kW to 26kW only and 20% off installation labour applies only in conjunction with a new Northern Lights generator purchase either floor stock or factory order and excludes consumables and any additional parts that may be required. *Excludes any additional delivery/freight or a change to airfreight, however if requested this can be quoted at an additional cost, not applicable on parts and not available with any other offer or discount. *Prices are current as at 12 November 2026 and may change at any given time. *Images are for illustrative purposes only and the generator supplied may differ in appearance.

Stock is subject to prior sale. All sales are subject to our Terms & Conditions.

Call